Many people constructing houses in Pakistan complain about a lack of adequate parking space and proper ventilation. However, if planned and designed well, a 10 Marla house can provide reasonably good family areas, parking, and ventilation. Residential plots in Pakistan are about 35 × 65 feet. You can also build a single-storey or a double-storey house, based on your preference and budget.
When designing a 10 Marla house in Pakistan, room sizes should be balanced to provide adequate privacy and natural light.
What is the Actual Size of a 10 Marla Plot in Pakistan?
A 10 Marla plot in Pakistan is 2,275 square feet and can be up to 35 × 65 feet in some housing schemes. However, it is not uniform or standard. The actual sizes should be properly confirmed in allotment documents and approved site plans.
The placement of rooms and parking space in a building is affected by several factors, including the site's frontage, depth, natural constraints, surrounding buildings, and legal provisions and building regulations. Building regulations, in particular, stipulate setbacks and covered areas and restrict the space available for construction.
Best Design Options of 10 Marlas Houses in Pakistan
SINGLE STOREY
Because all rooms are on the same level in a single-storey house plan, this layout suits smaller families. This house plan can have 2-3 bedrooms, a living room, a kitchen, and bathrooms.
If the house plan has a central courtyard, it helps provide natural light and cross-ventilation throughout the house. This floor plan is good for families with elderly members and people who do not want to use stairs daily.
DOUBLE STOREY
A 10 Marla double-storey house gives more planning flexibility to larger families. The ground floor can include a kitchen, living and dining area, and 1-2 bedrooms. The first floor can have more bedrooms, a family lounge, and a terrace.
The staircase should be located so it doesn't block the main living area while still serving all levels of the house. Zoning can be achieved by constructing the house over two storeys.
|
Feature |
Single-Storey House |
Double-Storey House |
|
Bedrooms |
Usually 2–3, depending on space |
Often 3–5 or more, depending on layout |
|
Family spaces |
Mostly on one level |
Can have separate lounges |
|
Accessibility |
Easier for elderly residents |
Requires staircase access |
|
Privacy |
Shared spaces are closer |
Better separation between floors |
|
Construction |
No upper-floor structure |
Requires additional structural work |
|
Future use |
Limited vertical expansion |
More flexible room distribution |
Ideas for 10 Marla Ground Floor Plan
Plan your 10 Marla ground floor according to daily activities, movement, and guest access. The plan should include a car porch, main entrance, lobby, drawing room, family lounge, bedroom, kitchen and dining. The ground floor plan may also include a staircase.
One sample plan places the car porch and drawing room at the front of the house, the family lounge and dining in the centre, and the private area with a bedroom and attached bath. The rear has the kitchen and washing utility area. The staircase may be centrally or side-placed.
A common preference in Pakistani households is to place the drawing room near the main entrance, allowing guests access without requiring them to enter the family's private areas.
For a family that receives guests, it is beneficial to include a drawing room with a convenient entrance and a nearby guest bathroom in the house plan. The family lounge can be placed more toward the interior for privacy.
Ideas for Designing First Floor with 10 Marla Plot
A 10 marla first-floor plan typically includes 2 to 3 bedrooms with attached bathrooms, a family sitting area, and a balcony or terrace.
Here’s an example arrangement:
-
2 bedrooms on the opposite side for better privacy
-
Another bedroom can be shown if the covered area permits.
-
A family lounge can be placed next to the staircase.
-
A kitchenette can be placed on the first floor.
-
A laundry or storage room can be shown
-
A balcony or terrace can be shown.
The staircase can be placed to open into a first-floor lounge rather than a bedroom.
For extended families, an upper sitting area helps provide privacy while using shared facilities. A first floor with many small rooms can feel cluttered and closed, and reduce natural ventilation.
Best 10 Marla House Designs
For a Small Nuclear Family
A three-bedroom layout may work better for a family of four than four or five smaller bedrooms. The ground floor can have a lounge, kitchen, and dining area. The remaining bedrooms can be placed upstairs.
Built-in closets and a storage area can help declutter the bedrooms and other areas of the house. This design provides enough space for the family to spend time together while allowing privacy when needed.
For a Joint Family
Four or more bedrooms, two or more bathrooms and a couple of sitting areas are some of the requirements of a joint family. A double-storey layout can help meet these needs.
For instance, one of the first-floor bedrooms and lounge can be allocated to the younger members of the family, while the parents and other relatives can occupy the other bedrooms and lounge on the ground floor. A larger or additional kitchen can be included to meet the needs of multiple households.
For Families with Elderly Parents
Elderly parents can have their own private bedroom and bathroom on the ground floor. This may also help limit the need to use the stairs. Easy access to different areas of the house can be ensured through adequate lighting and wide door openings. These can be included as part of a new house's design. Modifying an existing house to include these features may be very expensive.
10 Marla House Design Examples
A 10 Marla house front elevation design features a strategic layout that combines functionality, an aesthetically pleasing style, and quality, long-lasting building materials.
Such design elements may include:
Contemporary exteriors: May combine paint, stone, or textured surfaces, while avoiding excessive ornamentation. For ideas on arranging the front windows, balcony, and car porch, explore these house front elevation designs for 10 marla plots.
Shaded windows: May include adequate projections or shades to control direct sunlight.
Functional balconies: May incorporate outdoor space while considering privacy or weather conditions.
Neutral interiors: May make use of light colours to create a brighter environment.
Built-in storage: May include cabinets and wardrobes to lessen clutter.
Such design elements may also be varied to suit the region's climate. For example, excessive use of unshaded large windows in Pakistan may allow excessive heat to build up in the house during the summer season, and glazing or other appropriate shading may be necessary.
How to Maximise Space in a 10 Marla House?
There are several ways to maximise space in a house without increasing the covered area, including the following.
Eliminate long corridors: Connect rooms through functional lobbies.
Utilise storage space under the stairs: Storage may be provided under the staircase.
Furniture with multiple uses: A sofa or recliner with storage may be used in a living room.
Built-in wardrobes and storage: Storage may be provided in bedrooms to reduce clutter.
Kitchen cabinets: Use vertical storage and organised shelving.
Furniture measurements: Ensure beds, sofas, dining tables, and cupboards do not obstruct movement.
A drawing may show a large space, but it may feel small once furniture is placed in the room. During the design process, furniture placement should be considered along with door swings and walking space. If you’re reviewing a drawing with your architect, knowing how to read a house plan (naqsha) can help you check room dimensions, door swings, and furniture clearances.
Ventilation, Natural Light, and Privacy in Pakistani House Maps
Considering Pakistan's climate, the house should be positioned so fresh air can come in and hot, irritating winds can be blocked. A good design should allow air to circulate in the room.
The design should be made in a way that considers heat and light on different sides at different times of the day. For example, the west side of the house may need more insulation to keep the house cool in the afternoons. Privacy is very important, as the design should avoid people from seeing inside bedrooms and lounges.
Ventilation shafts should be designed to connect and aid in air and daylight flow in and around the house. They should also be of the proper size and dimensions.
Estimated Construction Budget and Design Cost Considerations
The cost of constructing a 10 Marla house can vary based on the design and quality of finishing and materials. It is recommended not to rely too heavily on a single estimated figure without reviewing the house's architectural design.
The main components of the budget are:
Grey Structure: Foundations, columns, beams, slabs and walls, etc.
Finishing: Floor and ceiling finishes, doors and windows, etc.
Electrical: Wiring, switches, lighting and distribution.
Plumbing: Water and drainage system, sanitary fittings and accessories.
Kitchens and bathrooms: Cabinets, countertops, tiles, fittings, and accessories.
Professional fees: Architect, Structural Engineer and other consultants.
Construction of the grey structure is the first stage, and complete construction includes finishing, fittings, and fixtures.
Before finalisation, homeowners should verify current market rates and obtain an itemised estimate based on the finalised design. It's also advisable to keep a contingency allowance to cover any additional costs that may arise during construction.
Things to Verify Before Finalising a 10 Marla House Map
Before starting construction, check the architectural plans and verify that the proposed design complies with the requirements of the development authority and/or housing society.
Use this checklist before finalising the plan:
Check the actual dimensions of the plot.
-
Review the building bylaws.
-
Check the covered area allowed.
-
Check front, rear and side setbacks.
-
Check the maximum allowable building height.
-
Verify placement of bedrooms and bathrooms.
-
Check car parking requirements.
-
Review adequacy of daylighting and ventilation.
-
Obtain an adequate structural design.
-
Plan service ducts and fits for water, drainage and electrical systems.
-
Discuss the requirement for future expansion.
-
Obtain approval of the authority or housing society.
Building regulations can vary from city to city and from housing scheme to housing scheme. Homeowners in Lahore should be familiar with the regulations applicable to their particular development authority or housing society. They cannot assume that one set of plans will be accepted everywhere. If your plot falls under LDA jurisdiction, review the LDA map approval process in Lahore with your architect before submitting the plans.
One should never assume that a sample plan posted online will automatically be accepted and approved by the authorities concerned for construction. A qualified architect or town planner should review the plans. At the same time, a structural engineer should verify the adequacy of the plans' structural elements.
Practical 10 Marla House Layouts for Different Family Needs
The practical design of a 10 Marla house should consider the family's requirements and future needs. The design should be practical, comfortable, and proportionate to the family's requirements.
Case 1: Nuclear Family
A typical design of a 10 Marla house for a nuclear family of four should provide three bedrooms, a lounge, a kitchen, and a parking space. An architect may design the lounge to combine with the dining area, creating an even larger shared space.
Case 2: Joint Family
To provide adequate privacy to different members of a large joint family, a double-storey design may be useful. The first storey may house the family's public or shared areas, while the second storey may house the family's more private spaces.
Case 3: Elderly Parents
If the design incorporates bedrooms on the ground floor, a bathroom with easy access may also be placed there to avoid the need to use stairs. Wider doorways and corridors may also be incorporated into the design to make the facilities easier for elderly parents to use.
Before finalising plans, a homeowner should consult a qualified architect to review building bylaws, limitations, and setbacks for covers, as well as requirements for adequate ventilation, parking, drainage, and soil conditions in Lahore. It is advisable that a professional review the practicality and viability of plans before construction.
Frequently Asked Questions
How many bedrooms does a 10 Marla house have?
A 10 Marla house typically has three to five bedrooms, but this can vary depending on the dimensions of the plot, the covered area of the house, how many storeys the house has, and what size rooms are designated for each function.
Is a double-storey house better for a 10 Marla plot?
A double-storey house design can accommodate more rooms and, possibly, more functions for the family. A single-storey house, however, can be more practical for families with older members or smaller families.
What does a 10 Marla house plan show?
A practical house plan shows the layout for various family functions, such as bedrooms and bathrooms, as well as public and family lounges, a kitchen, storage, ventilation, utility areas, a car porch, and staircases.
Should I engage an architect before I start building?
Yes. Both an architect and a structural engineer are needed to create a functional layout and ensure the structure's safety and integrity, respectively. It is always better to have a professional plan and identify potential issues before construction starts.
Conclusion
In conclusion, the best design for a 10 Marla house in Pakistan is the one that uses the family's limited space most effectively. It helps the family meet their everyday living needs. Whether the house design is single-storey or double-storey, it should provide privacy for guests, sufficient parking space, and adequate ventilation and accessibility. A functional house plan should also accommodate the family's varying needs and reduce the need for unplanned extensions and construction.
Learn more: A Guide to Apartment Sizes in Pakistan: 1, 2 & 3-Bedroom Layouts in Square Feet